Tick Talk Time #61 | How I Manage My Collection of Clocks

This regularly featured blog is about the letters, questions, and stories I receive from fellow clock enthusiasts.

Tick-Talk Time is a special feature where I respond to readers’ letters and comments about their clock, clock-related issues and advice about specific clocks. When a question is particularily complex I consult with my clock community to ensure I offer the most pecise and helpful answers possible.

A reader recently wrote to ask how I manage a collection of more than 80 clocks. In particular, he was curious about whether I keep all the clocks running, how I manage the daily winding requirements, and whether I service each clock at regular intervals. He also wondered whether I maintain a record of when each clock was last serviced.

A collection of vintage wall clocks displayed on a wooden shelf, featuring various clock faces and decorative backdrops.

These are reasonable questions, especially when considering the time and attention required to look after a collection of this size. So, how do I manage it all?

I currently have a collection of approximately 80+ clocks, but I certainly don’t have all of them running at the same time. In fact, I generally have only about 15 to 18 clocks running on a daily basis, about 12 others not running but on display throughout my home and a display of 15 in my office. The remainder are stored either to be revived at some future date to be prepared for sale or gifted if the need arises.

I have several 30-hour clocks, including some lovely ogee clocks, but I rarely run them. Having to wind them every day becomes a bit of a chore, so they spend most of their time sitting quietly in the collection, although about once or twice a year I will wind up each one to see if they still run correctly.

A collection of five ornate wooden wall clocks displayed on a shelf against a light-colored wall.

I tend to favour 8-day and 15-day movements for clocks that I keep running, simply because they require less frequent attention.

As far as maintenance is concerned, I don’t routinely dismantle and service every clock in the collection. I inspect them periodically, usually every three or four years, looking for signs of wear, dried oil or other problems. In some cases a re-oiling is all that is required. The clocks I select for regular operation receive a proper service. If I notice excessive wear or a clock begins to stop, then it is time for a complete teardown and servicing.

I use an Excel spreadsheet to record times when a clock is serviced, restored, or sold.

Maintaining a collection of this size is certainly a commitment, but I enjoy the process as much as I enjoy collecting the clocks themselves.

Related Articles


Discover more from Antique and Vintage Mechanical Clocks

Subscribe to get the latest posts sent to your email.


Leave a Reply