Among Canadian clocks, some names are immediately recognizable — Pequegnat, Canada Clock Company, Hamilton Clock Company, Wesclox from Peterbourough or Seth Thomas and New Haven imports sold through Canadian retailers. Others, however, tell a quieter story. Walter Clocks of Toronto belongs firmly in that second group, yet its history represents one of the last meaningful chapters of traditional clock manufacturing in Canada.
About two years ago, I made an effort to connect with surviving members of the Stonkus family and was able to reach one of Walter Stonkus’s granddaughters, as I recall. I proposed a question-and-answer format, with the intention of later shaping the material into a blog article. Unfortunately, despite a follow-up, I did not receive any further correspondence.
Since then, I have pieced together what information I could from a variety of online sources including The Canadian Clock Museum, located in Deep River, Ontario (Canada). While there are still some obvious gaps in the story, my goal here is simply to provide a general sense of Walter Clocks and their contribution to clockmaking in Canada.
So, let’s begin.
The company was founded by Walter Stonkus, who immigrated to Canada from Lithuania in 1927. Trained originally as a watchmaker, Walter brought with him both mechanical knowledge and European craftsmanship at a time when Canada was still developing its own manufacturing identity. By the early 1930s, the Toronto-based firm operated under the name Walter Stonkus and Sons Clocks.
From the beginning, the company followed a model common among Canadian makers: build the cases locally while sourcing precision movements from Europe.
Walter’s real strength appears to have been in design and cabinetmaking. Clock cases were produced in Toronto, often using walnut veneer before the Second World War, and stained birch in later years. The quality of the clock cases seems almost at odds with the small size of the company. Despite being a modest operation, Walter produced cases of remarkably high quality.
These early clocks typically featured spiral gongs and reflected the popular mantel styles of the era — practical, handsome, and intended for everyday homes rather than grand showpieces. It is also possible, though unconfirmed, that Walter clocks supplied finished cases to the Forestville Clock Co., operating in Toronto, Ontario (Canada) at the same time.
Like many small manufacturers, the company’s progress was interrupted by the Second World War. Production was suspended, largely due to the difficulty of obtaining imported movements and the broader shift of industry toward wartime needs.
When production resumed after the war, the business entered a new phase. Walter’s son Bill joined the company, and several recognizable design features emerged. Postwar clock cases were often made from stained birch, and many models incorporated what became something of a Walter trademark — a round removable back door that allowed easy access to the movement. German-made Urgos movements, both two-train and three train, powered many of these clocks, combining reliable European mechanics with distinctly Canadian cabinetry.
In many ways, Walter Clocks filled an important gap in Canadian horology. After the closure of the Arthur Pequegnat Clock Company in 1941, very few domestic manufacturers remained. Walter Clocks, along with the Forestville Clock Co. of Toronto, helped carry Canadian clockmaking into the mid-20th century, even as the industry itself was beginning to change.
By the 1950s tastes were shifting. Mantel clocks were no longer the focal point of the living room. Television sets were taking their place, and inexpensive electric clocks were rapidly gaining popularity. Like many traditional makers, Walter Clocks adapted by moving into cuckoo clocks, 400-day clocks, and alarm clocks — products that reflected changing consumer demand. Increasing competition from imported clocks further reduced the viability of local production.
Walter Stonkus’s set of Starrett measuring tools
The company ultimately ceased operations sometime in the late 1950s. The exact year — and the precise reasons for closure — remain uncertain, but Walter Clocks had operated in Toronto for more than thirty years, a respectable lifespan for a small Canadian manufacturer navigating enormous technological and cultural change.
Today, Walter clocks occupy an interesting place for collectors. They are not rare in the sense of limited experimental pieces, nor were they mass-produced in American quantities. They were never a large industrial producer, which explains why surviving examples feel scarce today.
Sadly, relatively few of these clocks survive today, and they seldom appear for sale online. While browsing Facebook Marketplace the other day, I came across one very much like the example pictured below, though fitted with a Westminster chimes movement. It was in poor condition and listed as a non-working, parts clock. Otherwise, it was the first example I have seen come up for sale in quite some time.
The Walter Clock Co. represents something uniquely Canadian: practical craftsmanship, locally built cases, and dependable European movements assembled for everyday households.
For collectors like myself, these clocks serve as reminders that horological history is not only written through grand innovations or famous names. Sometimes it is found in the steady work of immigrant craftsmen who built honest, functional objects meant to live quietly on mantels across the country — marking time for generations of Canadian families.
Related Link
Ten active clock companies in Canada in the 1950s; Canadian clock collectors are most familiar with the Arthur Pequegnat Clock Company, which closed its doors in 1941 but 7 years later a number of clock companies were alive and flourishing in Canada, predominantly in areas in and around Toronto.
In an era when Canadian furniture manufacturers were struggling to compete with international imports, one company stood out not just for its elegant craftsmanship but for the remarkable story behind its founder.
Craftline Industries, established in Toronto during the mid-20th century, was the brainchild of Manny Drukier, a Holocaust survivor whose vision, ingenuity, and resilience transformed a fledgling furniture operation into one of Canada’s premier producers of home furnishings and decorative clocks. With little formal education but a boundless entrepreneurial spirit, Drukier built more than a business—he created a legacy that continues to tick away in homes across North America.
Manny Drukier, as a young man, after WWII
In preparation for an article on Craftline Industries and its founder, Manny Drukier, I contacted the Drukier family with a series of questions. My main point of contact for this article was Cindy Drukier, Manny’s daughter. The Drukier family responded with remarkable generosity, providing a wealth of information, far exceeding what I had initially sought. I have included the entire text of their reply to me and have their permission to make minor edits for flow and clarity.
A snapshot of production, entitled Production Operations 1974, offers readers a clear sense of the scale and ambition behind Manny Drukier’s vision.
Manny Drukier’s Story as Told by His Family
From his daughter, Cindy Drukier, “The answers to the questions you asked may be more than you bargained for. Apologies for the excessive detail in some places, but the family decided that since such scant online evidence of Craftline exists, this was an opportunity to enter it into the digital record. These days, if it doesn’t exist online, it’s almost as if it never happened. So we’re grateful for the opportunity!”
The answers were written by Manny’s daughter Cindy, with input from her mom, Freda Drukier, and three siblings, Gordon, Laurie, and Wendy. Cindy also consulted the 1974 Canadian Jeweller article (which I have summarized in a separate section) and Manny’s unpublished writings. Manny has a published memoir, “Carved in Stone: Holocaust Years – A Boy’s Tale,” but it stops when he arrives in Canada. He wrote a Part 2, but it wasn’t published before he passed. Manny died in January 2022 of Alzheimer’s at 93.
The Vision
In 1948, Manny arrived in Toronto, a 19-year-old Holocaust survivor from Poland. He’d already spent a year in New York, but his mother and sister had made it to Toronto post-war, so he moved to Canada to join them.
Suddenly, Manny had to find a way to support the family. While buying furniture for their tiny flat with savings from New York, it dawned on him that the city was full of fresh immigrants needing to do the same—furniture would be a booming business, he figured. He had zero experience but managed to finagle (i.e., lie that he had experience) a sales position in a furniture store and quickly excelled at it, earning $30 for a six-day week, plus 2 percent commission.
He lasted less than a year working for someone else. By then he decided he had learned all he could and would go into business for himself.
He rented his first small store with his brother-in-law, David Rosenfeld, on Bloor St. West near Dufferin in downtown Toronto and called it North American Furniture. It went well, and soon they opened a second location on The Danforth on the east side of downtown Toronto. In 1961, they closed both to open a much larger and more upscale store in a former supermarket at Bathurst and Eglinton.
By 1964, he noticed he was importing more and more goods from the United States because Canadian furniture, although well-made, wasn’t elegant enough for modern consumer demand. He saw an opening in the market. He also disliked being the middleman—selling the wares of others—so he decided to go into manufacturing.
He didn’t have a clue how to do it, but he thrived on challenge and had infinite faith in his ability to figure things out. He sold North American Furniture to his brother-in-law and cobbled together a couple of partners for his new venture. Leonard Caplan was manufacturing case goods in Georgia, and Henry Gancman was a Canadian maker of chrome kitchen sets, which Manny sold in his store.
Manny, circled in red
They opened a small factory in the north end of Toronto, on Lepage Ct., employing about 15 people. One was my mother, Freda, who set up the bookkeeping and ran the one-woman office.
A couple of years later they moved to a bigger location, that included a showroom, on Milvan Dr. A few years after that they bought some land (including some from the power company, Ontario Hydro), to eventually build a 215,000 sq foot factory, showroom, and offices on 13 acres located at 15 Fenmar Drive in Weston, and industrial area at the northwest end of Toronto.
Craftline catalog
Craftline manufactured all-wood occasional furniture such as coffee tables, end tables, curios, and consoles, and, later on, wall units and grandfather and grandmother clocks. It eventually became Canada’s top manufacturer of elegant furniture, employing about 250 people.
Craftline catalogue
Cindy added, “Manny was the main designer for all the furniture, including the clocks. He had no experience in this, of course, and couldn’t really draw on any either, but he always had lots of ideas!”
ProductionOperations 1974
The information in this section is sourced from the March 1974 issue of Canadian Jeweller magazine.
Demand for Craftline grandfather clocks was high in 1974—so high, in fact, that the company couldn’t keep up with orders. In 1973, Craftline produced 2,500 grandfather clocks and expected to double production by the end of the year, 1974. At the time, owner Manny Drukier estimated the U.S. retail market for clocks, priced between $200 and $4,000, to be worth $200 million.
Manny is in the special clock boutique area of the factory
Craftline began making grandfather clocks in 1968, and by 1974, 20% of the company’s total output was devoted to them. The tall clock cases were made from solid lumber and veneered with fruitwood, elm, and ash, in styles such as Spanish, Mediterranean, Colonial, and Country French.
They produced both eight-day mechanical clocks and transistorized, battery-operated, pulsation-type clocks. The higher-priced models used mechanical movements, while the less expensive versions, made by subsidiary Craftique, used battery-powered movements. Craftique, by 1974, had manufactured 14,000 units.
The production floor
In 1974, clock faces, hands, and weights were imported, although Craftline was exploring Canadian sources. The mechanical movements were imported from two suppliers in Schwenningen, Germany. One supplier would have impacted production, while relying on two suppliers was a safer approach.
While the suppliers were not named in the article, at least six companies were manufacturing movements in Schwenningen at the time: Kienzle, Mauthe, Hermle, Schatz, Urgos, and Haller. (Author’s note: Urgos and Hermle would have been the suppliers)
Eaton department stores began selling Craftline clocks in 1972, but could not get enough stock to meet demand. However, most clocks were sold through furniture stores, where salespeople were well-equipped to market them. Jewellery stores typically bought in smaller volumes, as limited floor space made it harder to display the larger clocks.
Checking on Canadian sources for parts
The Craftline plant could finish 700 clock cases in two days, but the four-person team responsible for installing movements could only assemble 36 completed clocks per day. Much of the training for clock assembly was done in-house, with employees learning from one another.
Back to the story.
Launching the Clock Line
Manny constantly had an antenna up, looking for profitable ways to expand Craftline’s offerings, and, in 1968, he got the idea for grandfather clocks. We’re not sure where the idea came from.
Craftline catalog
Manufacturing the wood cabinets was easy, but not so the clockworks. He had two suppliers in the German Black Forest, but we don’t know more than that. I do know that, being a Holocaust survivor, he initially had misgivings about buying the works from Germany, but they were excellent and reliable, so he went with it. He said he also considered sourcing them from Asia, but decided it was too risky. He had expressed hope of buying them from a Canadian source in the future, but that never happened.
The clock cases were made of hardwood like elm, ash, and fruitwood. There were many designs, including traditional, Spanish, Mediterranean, colonial, and country French. They either had an eight-day wind-up chain mechanism or battery-operated pulsation movements. The highest-end grandfather clock was an oriental design with black lacquer and gold. The wholesale price for that clock was about $1,000 (CAD) in the early 1970s. It was the only model with an imported case—from Portugal, as it turns out.
He also started a spinoff company called Craftique Originals that produced ornamental objects from molded urethane. Craftique’s products included elaborate mirror frames, framed art reproductions, wall-mounted weather stations, and a line of wall clocks that looked like miniature grandfather clocks—except their brass weights were purely decorative and they didn’t chime.
Clock Sales and Ice Cream
Craftline had a team of salesmen who covered Canada coast to coast, and a bit of the eastern United States. All clocks were branded as either Craftline or Craftique, and they were sold to department stores and independent retailers, not to individual customers. He did, however, offer a premium service: customers could order a personalized engraved brass plate for their clock. Cindy Drukier spent one summer filing invoices and using an engraving machine to etch out those plates.
And there was one time when Manny traded a grandfather clock for its value in ice cream from the first Canadian importer of Häagen-Dazs. “Best business deal ever for a household with four kids!”
The Difficult Process of Ending Operations
Craftline lasted until 1991, when two hammers fell at once: The Canada-US Free Trade deal (precursor to NAFTA), and the introduction of the GST (Goods and Services Tax). Both hit manufacturers hard. Everyone knew Canada’s furniture industry wouldn’t make it, and despite a valiant effort to keep things afloat, the bank stepped in and forced Craftline into bankruptcy.
Craftline catalogue
By then, Manny was the sole owner. He and Henry had bought out Leonard in about 1975, and Henry got out in the final few years.
It was very upsetting, says my mom, after putting so much of your life, money, time, energy, and creativity into something, and then to have the rug pulled out from under you through no fault of your own.
She worked by his side the entire time. Manny was more philosophical and practical about it. He really didn’t dwell on things. It happened, so it happened. Meanwhile, he had other business ventures and interests. He also took the opportunity to go to Poland, with Freda, for the first time since the war and write his memoir (Carved in Stone: Holocaust Years – A Boy’s Tale).
Grandfather clockowned by the author’s daughter
Personal Challenges
We had one very fine oriental-style grandfather clock for about 40 years until it was consumed by flames in a house fire in 2011. So we all grew up with that wonderful ambient chime every 15 minutes. We’re elated to hear that many Craftline clocks are still working well!
What he enjoyed most about business was always the challenge. Clocks were just the next challenge, having mastered furniture. Lack of experience was never a barrier. He was not motivated by money—he was motivated by trying to make a longshot succeed. Nothing daunted him. Certainly, that attitude came from surviving the Holocaust. Money was fleeting—in a single day, it could be made worthless. And since he’d already been through the worst, no setback was terribly troubling. He also got bored quickly with the routine.
TheLegacy of Manny Drukier
It’s extremely heartwarming to hear that you (author) care to research and record the history of Craftline. He’d be gratified to know it! Occasionally, we hear about this or that Craftline clock still standing in someone’s home, and it’s always satisfying to know its chimes are resonating in someone’s life.
Grandmother clock owned by the author’s sister
Manny had many business ventures over the years, not just Craftline, although Craftline was the constant, and the one that made money. But he also dabbled in real estate, although he found it generally uninteresting (unless he had colourful tenants).
He published two short-lived magazines—a cooking magazine, “à la carte [sic]”, and a literary magazine, “The Idler”. He opened a pub we lived above, also calledThe Idler, and ran that for 15 years. He became an author and the star of a documentary my husband and I made about his war years called Finding Manny.
Manny was an innovator—if he had a vision, he went for it, and nothing would stop him. Because of the war, his formal education stopped at grade 4, but he was a voracious reader and a lifelong learner. He was a generous mentor and an incurable optimist. He also had a great sense of humor and left us with many useful words of wisdom.
“I’ll leave you with a few gems that seem most apt:
LIfe isn’t a cafeteria, you can’t always choose what you want.
Sometimes a kick in the pants is also a step forward.
Don’t be the schmuck who ends up walking backwards when you’re moving furniture.
I think I’ve contributed something by my staying alive. (in Finding Manny):
We agree.
The Drukier Family”
That’s the story—more than I ever expected. I encourage you to watch Finding Manny, which explores Manny’s early life, the profound loss of family members during the Second World War, and the horrors of the death camps.
Given the lack of other dedicated online sources, this stands as the most reliable and comprehensive resource currently available on Craftline Industries.
My wife’s uncle was an internist (internal medicine specialist) in Newfoundland and practiced for many years but dementia and its attendant complications finally got the best of him. He spent the last 5 or so years in a locked ward of a residential facility for the elderly.
As part of his practice, he set up a home office where he would receive patients and consult with colleagues. In his office was a wall clock given to him by a former patient.
When he passed away his possessions were distributed among his family members with the clock going to his brother who, himself passed away this past year. Unfortunately, there was not much interest in the clock and it spent 15+ years in a Rubbermaid container in the basement of his brother’s home.
His wife is currently in the process of moving to a smaller home, giving away what she could and since I have a keen interest in antique and vintage clocks she determined that the best place for the clock was in the hands of someone who could have it working once again. I did not have a clear idea of what she was giving me though I knew that it was a mechanical wall clock.
Quickly mounted on the wall to check things out
The style of the clock is a “wag on the wall”. It is a strange name but basically, it is a clock with the movement enclosed in a small case and with a pendulum and weights exposed.
In the years between 1660 and 1870, the wag-on-the-wall was a very common clock. It is so named because the pendulum appears to wag on the wall like a dog’s tail. It was eventually deemed not attractive enough to hang on the wall in many upscale homes, so wooden or glass and wooden cases were added. The long-case or grandfather clock actually evolved from early wags-on-the-wall clocks. Wooden cases were used to hide the unsightly weights and cast-iron pendulum.
The style did not totally disappear as many manufacturers continued making the wag-on-a-wall style clock to this day.
There are no maker’s marks on the dial or the movement but it appears to have a Canadian connection. There were several clock assemblers operating in Canada up to the mid-1970s, and it was likely assembled by the Forestville Clock Company of Toronto from parts sourced from West Germany but I will learn more as I continue my research.
The only markings on the movement are a serial or production number ending with 65 behind the pendulum leader and UW 7/29 (a date or other measurement) just above the aforementioned number. The year 1965 seems about right judging from the two-tone case tinting popular in the 1960s, The clock case is not particularly attractive today but such was the style at the time. I don’t think it will ever be my favorite wall clock.
It is a weight-driven rack and snail time and strike movement possibly made by Hermle, Mauthe or Urgos. I have worked on similar movements in the past though this one is a bit different, specifically the arrangement of the hammer assembly and the main wheels are reversed from each other.
The weights and pendulum are polished
It is not apparent upon first inspection if the movement has ever been serviced. Rather than run the risk of further wear I plan to test it briefly before servicing the movement. The movement looks robust and well made but I am expecting minor wear issues commensurate with age when I open it up.
While it is largely intact the bottom middle finial is missing. Otherwise, the case is in very good condition for its age. I mounted it on the wall to check things out and yes, it does wag!
In an upcoming article, I will go over the steps in servicing this movement.
Antique and Vintage Mechanical Clocks 
You must be logged in to post a comment.