When Clocks Had One Hand

Have you ever wondered where the terms “half past the hour,” “a quarter past,” and “a quarter to the hour” originate from? At one time these terms were practical and necessary for understanding time when precise minute readings were unavailable.

Stepping Back In Time

The practice of dividing an hour into quarters comes from the way timekeeping developed in medieval Europe. The concept of dividing an hour into halves and quarters predates mechanical clocks and can be observed in the use of sundials.

The shadow’s movement was tracked relative to hour lines and intermediate markings, reinforcing the habit of describing time in fractions of an hour.

Mechanical clocks, first appearing in the 13th century, used gears to divide the hour into equal parts: halves and quarters. Early tower clocks for example often lacked dials entirely. Since most people could not read a clock face, bells were a way of indicating the time.

The addition of dials in the 14th and 15th centuries made it possible for people to see the time visually, along with the auditory cues of the bells.

The Salisbury Cathedral tower clock is without a dial face (Photo by Phil Ledwith on Pexels.com)

Clocks with a Single Hand

Early mechanical clocks, which emerged in the late Middle Ages (around the 13th and 14th centuries), typically had only an hour hand. Minute hands were not introduced until the 16th century, and even then, they weren’t common until the 18th century.

The origins of phrases like “half past,” “quarter past,” and “quarter to” are connected to the period when early clocks had only one hand—the hour hand. These terms were practical and necessary for understanding time when precise minute readings were unavailable.

Half past two (taken at the NAWCC clock museum in Columbia, Penn)

These one-handed clocks divided the clock face into 12 hours, with each hour subdivided into 4 quarters. The divisions on the dial were marked to indicate these fractions, making it possible to estimate time to the nearest quarter-hour.

Standardized Terms

Terms became standardized as clocks became widespread and people needed a common language to express specific points in time.

The term “quarter” derives from the Latin quartus, meaning “fourth,” reflecting the division of an hour into four 15-minute segments.

“Half past” signifies that half of the current hour has passed. This phrasing likely became popular in English because it is concise and intuitive. “Quarter past” means 15 minutes past the hour, while “quarter to” indicates 15 minutes remaining until the next hour. This usage reflects a practical way of describing time, based on the idea of dividing the hour into quarters.

Reading Time with One Hand

Since these clocks could only approximate time, people described it in terms of the fractions visible on the clock face. Some common phrasings including some mentioned above are:

“Half past” meant the hour hand was halfway between two hour marks.“Quarter to” referred to the hour hand being three-fourths of the way toward the next hour.
It’s six, without the o’clockIt’s half-five, referring to 5:30 for example
“Quarter past” indicated the hour hand had moved one-fourth of the way between two hour marks.Some cultures use after rather than past, or to rather than till
Non-specific times such as around five or around 11Or specifically, it’s exactly eight

Four of the clock, or 4 o’clock (taken at the NAWCC clock museum in Columbia, Penn)

Cultural Impact Then and Now

This method of time-telling became ingrained in the language long before the widespread use of minute hands. Even after clocks with two hands became standard, the traditional phrases persisted because they were convenient and widely understood.

But today the phrases are beginning to leave our vocabulary.

Quarter to ten (taken at the American Watch and Clock Museum in Bristol Conn.)

These expressions seem to be fading from modern use reflecting changes in how we interact with time and the use of precise numbers when we communicate. As analog clocks become less prevalent in homes, schools, and workplaces, fewer people are exposed to the visual representation of quarters and halves on a clock face.

Despite this decline, these phrases still hold cultural and historical significance and are likely to persist in certain contexts, such as storytelling, or traditions involving analog clocks.

Indeed, many young people today struggle to read an analog clock or have difficulty understanding the meaning of the hands.

While writing this article, my wife asked me for the time. ‘It’s 5:47,’ I replied.

Castle Combe’s Clock: Unveiling A 17th-Century Turret clock in the Cotswolds

Old clocks often have rich histories that reflect the technological advancements and craftsmanship of their time. Exploring these clocks provides a unique perspective on the history of timekeeping, engineering, and artistry in the UK. Many of these clocks are tied to significant historical events or figures, offering a tangible connection to the past.

High street in castle Combe
The village of Castle Combe

Many old clocks, especially those in historical buildings like churches or cathedrals, are masterpieces of design and craftsmanship. These clocks often feature intricate mechanisms and beautiful decorative elements that showcase the high level of skill and artistry of their makers. Exploring these clocks allows one to appreciate the aesthetic and technical achievements of the past.

St. Andrews church
St. Andrews church

While on vacation in the UK, I discovered an old clock in the charming village of Castle Combe, nestled in the Cotswold region of England. Visiting Castle Combe feels like stepping back into the 17th century. The village is located around 8 km northwest of Chippenham. Our tiny tour bus made it into the village, dodging the ban on large coaches that flood the area with tourists.

St Andrews church spire
St Andrews church spire

No new houses have been built in the historic area since about 1600. Interestingly, the village takes its name from the 12th century castle which stood about 500m to the north. The site where the castle once stood contains the old earthworks and masonry, from the 12th century. Tourists seeking a castle might find themselves sadly disappointed.

The altar area inside St Andrews
The altar area

The clock is housed within St. Andrew’s Church, which can be reached by a pathway leading from the main street. Part of the chancel is 13th-century. In 1850–51 nearly all of the building, except the 15th-century tower, was taken down and reconstructed to the same plan. The church is very active, holding services every Sunday and serving as a hub for various activities and festivals throughout the year.

Surprisingly, instead of in the clock tower which one would expect, the clock is located inside the church itself and remains operational.

The turret clock in operational condition
The turret clock is in operational condition

The clock was converted to an anchor escapement and required the movement to be turned upside down consequently the striking train is at the bottom and the going train is at the top. This necessitated a redesign of the countwheel. The addition of the anchor escapement reflected new technology as old clocks were made more accurate and efficient.

This is one of the earliest working clocks in England and was likely installed when the tower was completed in 1500. Naturally worn parts notably the escapement have been replaced.

It is not the oldest in the UK. The turret clock at Salisbury Cathedral predates this one, dating back to 1386.

Salisbury Cathedral
Salisbury Cathedral, photo by Phil Ledwith on Pexels.com

There is no face on the St. Andrews clock for a good reason. In those days men working in the fields need only to know the hours; the hour is struck on a large bell. In 1984 the clock was brought down from the tower and now resides within the church walls. Prior to that, a person climbed the tower every day to wind it. At the same time in 1984, an electric winding mechanism was fitted.

In Summary

Searching for old mechanical turret clocks can be intriguing for several reasons.

For those interested in mechanics and clockwork, studying old turret clocks provides opportunities to understand their intricate mechanisms and how they were constructed and operated in different eras. These clocks offer insights into the technological advancements of their time periods and their roles in communities.

Most importantly, many turret clocks have fascinating stories and legends associated with them, adding to their allure and making the search for them even more compelling.

Website Powered by WordPress.com.

Up ↑